1
Get ready safely
Put on the correct PPE before you begin, including gloves, eye protection and any site-required safety clothing.
2
Green means go
Check the status light before use. Green means you are good to go. Red means stop and report before continuing.
3
Earth lead connected
Attach the earth lead, then clean the receptacle and nozzle. Before connecting, make sure the vehicle receptacle and nozzle are clean and ready to use.
4
Nozzle secured
Connect the liquid fill nozzle securely before moving on to the next step.
5
Tank pressure checked
Vent the vehicle tank down to 10 bar, then close it. Use the vent valve to bring the tank pressure down before fuelling.
6
Fob authorised
Use your Roadgas fob at the pump, then enter the vehicle kilometres when prompted.
7
Fuelling underway
Press and hold the black button while fuelling. Keep the button held down throughout the fuelling process.
8
Vent closed and nozzle stowed
Once fuelling is complete, close the vent valve before disconnecting. Disconnect and clean the nozzle, then stow it safely.
9
Earth lead removed
Once the nozzle has been stowed, remove the earth lead from the vehicle.
10
Final safety check
Refit the protective cap. Make sure everything is safely returned and secured before leaving the station.
Speak To Us
Contact us to discuss your gas supply requirements and the right solution for your fleet.
